Electrical Safety

ELECTRICAL SAFETY

The electrical design and the installation shall also be in accordance with established codes, sound engineering practices and international standards and shall conform to the local statutory regulations

The electrical design shall provide the following

  • Safety to personnel and equipment
  • Reliability of service
  • Minimum fire risk
  • Sufficient emergency power to safely shutdown in the event of an incident
  • Personnel involved in handling, decanting or moving hazardous material shall be fully trained to do so. Detailed procedures, protective clothing, respiratory equipment etc. shall be provided for those personnel.

NOISE

The need for noise control shall be taken into account during operations and periodic noise testing is done.

Noise levels shall be limited throughout the operations to

  • Minimize the risk of hearing damage to personnel
  • Ensure alarm is audible
  • Permit adequate speech, telephone, and radio communication
  • Maintain working efficiency

NOISE CONTROL

Noise limits for working environment shall be specified taking into account the results of a project noise study, and the location of equipment and its acoustic environment.

Personnel hearing protection shall only be used where engineering methods of noise control are not cost effective or reasonably practicable.

We at Lalbag Polyplast sincerely feel that accident / ill health at the work places is preventable, provided concrete efforts are honestly put in by all.

X